Labocosmetica ÈNERGO 250ml - Water Spot and Limescale Remover

คุณสมบัติสินค้า:

ÈNERGO - น้ำยาขจัดคราบน้ำและคราบหินปูน

แบรนด์ : Labocosmetica

Share

#Labocosmetica® Made in Italy 

 

Labocosmetica ÈNERGO — น้ำยาล้างคราบหินปูน และคราบฝนกรด ระดับมืออาชีพ
ÈNERGO คือ ผลิตภัณฑ์กำจัดคราบ หินปูน (Limescale) และ คราบฝนกรด (Acid Rain) ทั้งบน กระจก และ สีรถ ได้อย่างทรงพลังช่วย ลดระยะเวลาในการขัดสี (Polishing) ลงอย่างมาก


ในหลายกรณี คราบหินปูนไม่สามารถกำจัดออกได้ด้วยการขัดสีตามปกติ ÈNERGO คือหนึ่งในไม่กี่ผลิตภัณฑ์ที่สามารถช่วย detailer ในงานที่ยากที่สุดงานหนึ่ง — การกำจัดร่องรอยคราบหินปูนออกจากสีรถ


สูตรเจลพิเศษของ ÈNERGO ช่วยให้สามารถลงผลิตภัณฑ์ เฉพาะจุดที่ต้องการได้ง่าย รวดเร็ว และแม่นยำ


ด้วยคุณสมบัติของสูตรนี้ ÈNERGO ยังสามารถใช้เป็น Primer สำหรับ Nano-Coating บนกระจก เพื่อขจัดคราบไขมันและทำความสะอาดผิวกระจกให้บริสุทธิ์ก่อนการเคลือบ
ÈNERGO ได้รับการวิจัย พัฒนา และทดสอบอย่างเข้มข้นในห้องแล็บของ #Labocosmetica® ร่วมกับผู้ผลิตรถสปอร์ตระดับโลก สำหรับการเปิดตัวรถรุ่นใหม่


อัตราส่วนผสม Labocosmetica ÈNERGO
-คราบหนักมาก / กว้าง ไม่ต้องเจือจาง
-คราบปานกลาง 1:5
-คราบเบา 1:10


วิธีการใช้งาน ÈNERGO
ÈNERGO สามารถใช้งานแบบสเปรย์ โดยสามารถผสมน้ำตามระดับความรุนแรงของคราบ และใช้ร่วมกับ Applicator Pad หรือ แปรงขนนุ่ม เพื่อเพิ่มประสิทธิภาพการขจัดคราบ

กรณีคราบหินปูนรุนแรงและกว้าง
หากใช้ PURÌFICA แล้วคราบยังไม่หมด ให้ทำตามขั้นตอนดังนี้
1. ผสม ÈNERGO ตามสัดส่วนความเข้มข้นตั้งแต่ ไม่ต้องเจือจางน้ำยา ถึง 1:5
2. ชุบน้ำยาลงบนผ้า แล้วทำงานบนผิวรถที่เปียก
3. ควรทำในที่ร่ม และไล่ไปทีละส่วนของพื้นผิว
4. ล้างออกด้วยน้ำ
5. ในกรณีที่ยังมีคราบหลงเหลือ ให้หยด ÈNERGO แบบเข้มข้นโดยไม่ต้องเจือจาง ลงบนผิวโดยตรงเป็นจุดเล็ก ๆ หรือเทลงบน แผ่นสำลี วางบนผิวรถ
6. ทิ้งไว้ 5 นาที พร้อมนวดวนเป็นวงกลม
7. เช็ดออกด้วย ฟองน้ำ หรือ ผ้าไมโครไฟเบอร์เปียก


ข้อควรระวัง
ÈNERGO ไม่ทำลายสีรถและชิ้นส่วนพลาสติก แต่สำหรับสีรถที่ อ่อน บอบบาง หรือสีชั้นเดียว (Single Layer Paint) แนะนำให้ใช้งานอย่างระมัดระวัง หลีกเลี่ยงการใช้แบบเข้มข้นโดยไม่เจือจาง เพื่อป้องกันการเกิดคราบเงา (Halos)

 

อ่านรายละเอียดเพิ่มเติมได้ที่

https://www.labocosmetica.com/product/energo-clean-acid-rain-water-stain-mineral-remover-car-detailing/


 

 

Labocosmetica® Made in Italy 


ÈNERGO removes limescale and acid rain strong contaminations from windows and bodywork, considerably shortening polishing time. Very often, limescale stains cannot be removed with normal polishing: ÈNERGO is one of the few products that can help the detailer in one of the hardest tasks, the removal of limescale traces from the paint.

Its special gel formula allows quick and easy direct application only in the areas where needed. Thanks to its formulation features, ÈNERGO may be used as primer for nano-coating on windows to degrease and purify them. ÈNERGO has been thoroughly researched, developed and tested in #Labocosmetica® laboratories in cooperation with the most prestigious sports car manufacturers worldwide for the launch of new models.


ÈNERGO removes from glass and bodywork limestone and acid rain residues , significantly shortening decontamination times. Help the detailer in one of the most arduous tasks, removing of traces of limestone from the paint. Its special gel formula allows an easy and easy direct application only in the points where it is needed.

 
Labocosmetica ÈNERGO Dilution Ratios
-Extensive Stains: Pure
-Medium Stains: 1:5
-Light Stains: 1:10

How to use ÈNERGO
ENERGO it can be used in spray mode , if necessary diluting it according to the severity of the contamination with the help of an applicator pad or a soft bristle brush in order to make the most of the decontaminating action.

In the presence of strong and extensive limestone stains that have not been removed from our PURÌFICA, apply ÈNERGO – diluted from pure to 1: 5 – on a glove and wipe it with a wet machine , away from the sun, one panel at a time and rinsing; if, on the other hand, after carrying out this step, limescale spots remain, apply ÈNERGO pure in small drops directly on the surface or pour it on a cotton pad placing it on the bodywork and letting it act for 5 minutes, massaging with circular movements. Then wipe with a damp microfiber.

ÈNERGO does not damage paints and plastic parts, but in the presence of delicate, soft or single-layer paints it is recommended to proceed with caution avoiding to use the pure product to avoid the appearance of halos.

For further information

https://www.labocosmetica.com/product/energo-clean-acid-rain-water-stain-mineral-remover-car-detailing/

 

 

Powered by MakeWebEasy.com
เว็บไซต์นี้มีการใช้งานคุกกี้ เพื่อเพิ่มประสิทธิภาพและประสบการณ์ที่ดีในการใช้งานเว็บไซต์ของท่าน ท่านสามารถอ่านรายละเอียดเพิ่มเติมได้ที่ นโยบายความเป็นส่วนตัว  และ  นโยบายคุกกี้